← Back To Previous Page

Skip to product information
#2122 Sliders for Jconcepts® Anvil Body (fits Axial® SCX10 III & Base Camp)
  • #2122 Sliders for Jconcepts® Anvil Body (fits Axial® SCX10 III & Base Camp)
  • #2122 Sliders for Jconcepts® Anvil Body (fits Axial® SCX10 III & Base Camp)
  • #2122 Sliders for Jconcepts® Anvil Body (fits Axial® SCX10 III & Base Camp)
  • #2122 Sliders for Jconcepts® Anvil Body (fits Axial® SCX10 III & Base Camp)
  • #2122 Sliders for Jconcepts® Anvil Body (fits Axial® SCX10 III & Base Camp)
  • #2122 Sliders for Jconcepts® Anvil Body (fits Axial® SCX10 III & Base Camp)
  • #2122 Sliders for Jconcepts® Anvil Body (fits Axial® SCX10 III & Base Camp)
  • #2122 Sliders for Jconcepts® Anvil Body (fits Axial® SCX10 III & Base Camp)
  • #2122 Sliders for Jconcepts® Anvil Body (fits Axial® SCX10 III & Base Camp)
#2122 Sliders for Jconcepts® Anvil Body (fits Axial® SCX10 III & Base Camp)

#2122 Sliders for Jconcepts® Anvil Body (fits Axial® SCX10 III & Base Camp)

$18.99
Product Type:
*Flat rate economy shipping offer is valid for USA orders only. Click on the image for more information. STL downloads do not have a shipping charge, and are available instantly.
3D Printed Product Information

This product is manufactured by us in house using 3D printing. It’s important to understand that 3D printing builds objects layer by layer, which can lead to some inherent characteristics that differ from traditional manufacturing methods:

  • Layer Lines: You may observe subtle horizontal lines on the surface of your parts, particularly noticeable on curved or angled surfaces. These are a natural result of the layered printing process.
  • Minor Surface Imperfections: Occasionally, small variations in surface texture, sometimes referred to as 'blobs' or 'zits,' may appear. These are often a result of nozzle start/stop points or other minor variations during the printing process. Some part of the parts may have a textured finish on them due to the texture of the 3D print bed itself.
  • Support Marks: If the part required any support structures to print correctly, since you cannot print in thin air, their removal can sometimes leave slight marks or rough areas on the surfaces where they were attached. We try to minimize these, and use them only in areas not highly visible.
I need an icon to show information for an STL 3d print file download 3D Print File Information

Purchasing STL Files: 

  • The file(s) will be available to you right after purchase.
  • By purchasing, you agree to use any provided STL file(s) only for yourself and for personal, non-commercial use.

Recommended Filament: We suggest using ABS or ASA for best results. PLA can be used, but may fail in hot climates due to its low melting point.

Please Note: The provided STL file(s) do not contain any printer settings. It is up to you to slice them for your specific printer. We do not offer any slicing or printing support.

Hardware: See below in the product description for a list of any additional hardware needed to complete this item. Hardware is not included with your file purchase.

Our high clearance sliders provides a better look, more clearance, and less hang ups on the rocks. Works with the stock chassis rails.

Features:

  • Designed specifically to work with the Jconcepts® Anvil body.
  • Smaller footprint gives you a better look.
  • More clearance and a smoother bottom for less hang ups.
  • Two sizes included to fit a larger variety of bodies.
  • Both sides have provisions to strap down a battery pack.

Material: ABS Plastic

Color: Black

    Fitment:

    • Axial® SCX10 III
    • Axial® Base Camp

        Includes: (Note: STL File Requires Listed Hardware)

        • Slider Mounts (2 Pieces)
        • Slider Tops (2 Pieces)
        • M3x8 Flat Head Screws (4 Pieces)
        • M3x14 Button Head Screws (4 Pieces)
        • Battery Strap (1 Piece)