← Back To Previous Page

Skip to product information
#7140 Link Riser (fits Element RC®)
  • #7140 Link Riser (fits Element RC®)
  • #7140 Link Riser (fits Element RC®)
  • #7140 Link Riser (fits Element RC®)
  • #7140 Link Riser (fits Element RC®)
  • #7140 Link Riser (fits Element RC®)
  • #7140 Link Riser (fits Element RC®)
#7140 Link Riser (fits Element RC®)

#7140 Link Riser (fits Element RC®)

$6.99
*Flat rate economy shipping offer is valid for USA orders only. Click on the image for more information.
3D Printed Product Information

This product is manufactured by us in house using 3D printing. It’s important to understand that 3D printing builds objects layer by layer, which can lead to some inherent characteristics that differ from traditional manufacturing methods:

  • Layer Lines: You may observe subtle horizontal lines on the surface of your parts, particularly noticeable on curved or angled surfaces. These are a natural result of the layered printing process.
  • Minor Surface Imperfections: Occasionally, small variations in surface texture, sometimes referred to as 'blobs' or 'zits,' may appear. These are often a result of nozzle start/stop points or other minor variations during the printing process. Some part of the parts may have a textured finish on them due to the texture of the 3D print bed itself.
  • Support Marks: If the part required any support structures to print correctly, since you cannot print in thin air, their removal can sometimes leave slight marks or rough areas on the surfaces where they were attached. We try to minimize these, and use them only in areas not highly visible.

Looking to add more climbing performance to your Element RC® truck? Then look no further! Our link riser will help keep that front end down when the trail gets steep.

How it works:

The link riser will create more triangulation between the rear upper and lower links. In short, this will increase the anti-squat value, however there are numerous other factors at play.

Increasing the anti-squat value of your crawler will cause the rear suspension to unload, essentially lifting the rear of the truck under acceleration. This is advantageous if you plan to climb steep lines as it keeps the rear end from squatting, which can remove weight off of the front tires, resulting in a rollover.

The other advantage to increased anti-squat is more overall rear traction. Since the chassis is lifting under acceleration, the tires are being planted into the rock resulting in more rear traction than a low anti-squat setup.

Material: Carbon Reinforced Plastic (CRP)

Color: Matte Black

Includes:

  • Link Riser - 13mm Lift (1 Piece)
  • M3x30 Screw (1 Piece)
  • M3 Lock Nut (1 Piece)