#7133 Mini Sliders (Fits Vanquish® VRD & Stance)

$12.99

*Flat rate economy shipping offer is valid for USA orders only. Click on the image for more information. STL downloads do not have a shipping charge, and are available instantly.

This product is manufactured by us in house using 3D printing. It’s important to understand that 3D printing builds objects layer by layer, which can lead to some inherent characteristics that differ from traditional manufacturing methods:

Layer Lines: You may observe subtle horizontal lines on the surface of your parts, particularly noticeable on curved or angled surfaces. These are a natural result of the layered printing process.
Minor Surface Imperfections: Occasionally, small variations in surface texture, sometimes referred to as 'blobs' or 'zits,' may appear. These are often a result of nozzle start/stop points or other minor variations during the printing process. Some part of the parts may have a textured finish on them due to the texture of the 3D print bed itself.
Support Marks: If the part required any support structures to print correctly, since you cannot print in thin air, their removal can sometimes leave slight marks or rough areas on the surfaces where they were attached. We try to minimize these, and use them only in areas not highly visible.

Purchasing STL Files:

The file(s) will be available to you right after purchase.
By purchasing, you agree to use any provided STL file(s) only for yourself and for personal, non-commercial use.

Recommended Filament: We suggest using ABS or ASA for best results. PLA can be used, but may fail in hot climates due to its low melting point.

Please Note: The provided STL file(s) do not contain any printer settings. It is up to you to slice them for your specific printer. We do not offer any slicing or printing support.

Hardware: See below in the product description for a list of any additional hardware needed to complete this item. Hardware is not included with your file purchase.

Looking for a narrower set of sliders for your VRD? Our high clearance sliders provides a better look and a better fit for those narrower comp bodies.

Universal Narrow Flat Top Sliders:

Works with most aftermarket bodies (except Jconcepts Anvil)
Flat top design for easy electronics and battery mounting
Includes smaller battery strap for those comp packs.

Tested to work with the following bodies:

Pro-Line® Comp Wagon
Pro-Line® Cliff Hanger (Full length & cab only)
Pro-Line® Coyote & Coyote Grande
Vanquish® Stance

Note: These sliders will sit inside of the body and may not go all the way to the body. See measurements to see how they would work for your setup.

Material: ABS Plastic

Product Fitment:

Vanquish® VRD Carbon
Vanquish® VRD Stance

*Note: These are designed to work with the factory chassis rails.

Includes: (Note: STL File Requires Listed Hardware)

Sliders (Qty 2)
M3x12 Button Head Screws (Qty 4)
M3x20 Button Head Screws (Qty 4)
M3 Lock Nut (Qty 2)
Battery Strap (Qty 1)

Note: Depending on where the links are mounted will determine which length screws are needed to mount. M3 nuts can be used with extra screws if needed.