← Back To Previous Page

Trail Sliders for Jconcepts® Anvil Cab (Fits Vanquish® VS4-10) (STL File)

Trail Sliders for Jconcepts® Anvil Cab (Fits Vanquish® VS4-10) (STL File)

$13.99
Skip to product information
Trail Sliders for Jconcepts® Anvil Cab (Fits Vanquish® VS4-10) (STL File)
Trail Sliders for Jconcepts® Anvil Cab (Fits Vanquish® VS4-10) (STL File)

Trail Sliders for Jconcepts® Anvil Cab (Fits Vanquish® VS4-10) (STL File)

$13.99

You will receive an email with the download links for the files right after purchase, so make sure to double check your email address at checkout.

Customers Also Bought These Items To Finish Their Build
I need an icon to show information for an STL 3d print file download 3D Print File Information

Purchasing STL Files: 

  • The file(s) will be available to you right after purchase.
  • By purchasing, you agree to use any provided STL file(s) only for yourself and for personal, non-commercial use.

Recommended Filament: We suggest using ABS or ASA for best results. PLA can be used, but may fail in hot climates due to its low melting point.

Please Note: The provided STL file(s) do not contain any printer settings. It is up to you to slice them for your specific printer. We do not offer any slicing or printing support.

Hardware: See below in the product description for a list of any additional hardware needed to complete this item. Hardware is not included with your file purchase.

These sliders are a must have when running a Jconcepts® Anvil body on your Vanquish® VS4-10 Chassis. This updated V2 design now also includes servo mounts for Reefs 55Micro and 2065 style servos as well as other strength improvements.

Features:

  • Includes rear cab mounts.
  • Has mounting locations for both the OD and Dig Servos
  • Includes our Mini Servo Adapter for the OD servo. The factory OD mount still works for the full size servos.
  • Includes DIG servo mounts for both full size and mini servos.
  • Includes a large battery tray setup to keep everything inside of the cab.

Battery Tray Size: 42mm x 130mm

Product Fitment:

  • Vanquish® VS4-10 Kit
  • Vanquish® Phoenix
  • Vanquish® Fordyce

Note: These are designed to work with the factory chassis rails. 

      Required Hardware To Complete: 

      • M2.5x8 Button Head Screws (Qty 8 - For RAW100 Servos)
      • M3x8 Flat Head Screws (Qty 22)
      • M3x8 Button Head Screws (Qty 4 - For 55Micro/2065 Servos)
      • M3x12 Button Head Screws (Qty 2)
      • M4x16 Set Screw (Qty 1 - To Shorten Dig Linkage)
      • Instructions