#2194 Axial® SCX10 III JT Gladiator Interior Set (2026 Version) (STL Files Only — Digital Download)

STL FILES ONLY — DIGITAL DOWNLOAD

This purchase is a digital file pack for 3D printing your own interior. No physical interior, cage, mounting parts, filament or hardware will be shipped. A suitable FDM 3D printer, filament and the hardware listed below are required. Product photos show finished printed examples; the truck and figures are not included.

Included in the download

• Individual STL files for the interior tub, dashboard, steering wheel, three-piece cage and mounting parts.
• Arranged .3mf project with print-bed layouts and orientations.
• Illustrated STL print guide and assembly instructions in PDF format.
• Assembly reference model, labeled “Do Not Print,” and DSM Off-Road STL file license agreement.

Print a cabin worth looking into for your JT. The DSM Off-Road interior set brings a detailed dashboard, sculpted seats, door panels and a removable tube-style cage to the 2026 Axial SCX10 III JT Gladiator. Designed and test-fitted around the truck, it adds a finished scale look with straightforward screw-together assembly.

Built for the 2026 Axial® SCX10 III JT Gladiator

The fitted tub leaves room for the mirror clips and lighting wires, while the front cowl brackets and rear retaining mount secure the interior to the body. Fitment to earlier JT versions or other bodies has not been verified.

Details throughout the cabin

• Detailed dashboard: Twin round gauges behind the steering wheel, round vents, center display, controls, glove box and DSM branding.
• Front and rear seating: Sculpted bucket seats and a three-position rear bench with defined cushions, bolsters and headrests.
• Center console: Cup holders, shifters, armrest and rear-facing detail.
• Interior door panels: Raised armrests, latch detail and lower pocket texture on both sides.
• Removable cage: Round-tube styling, front and rear grab handles, and closely spaced roof bars that flare outward at the rear. Three screw-together sections make assembly and removal simple.
• Ready for occupants: Seat mounting holes give you a way to secure optional figures or adapt your own drivers and passengers.

Easy installation

Download Installation Instructions (PDF)
Printable one-page guide for the interior and cage, including the hardware list.

Replace the factory rear cab brace with your printed retaining mount, assemble the dash and cage, and secure the cage through the four tub mounting holes. Slide the rear of the tub into its mount and fasten the front brackets to the body cowl. The rear mount reuses the factory screws; all additional assembly hardware must be purchased separately.

Printing your set

The supplied bed layouts are designed for the 256 × 256 mm bed size used by Bambu P Series, X Series and A1 printers, and similar-size printers. Print at 100% scale. Suggested layer height: 0.12–0.16 mm. The included .3mf is set to 0.16 mm layers, two walls and 15% infill; select the correct printer, nozzle, build plate and filament profile before slicing.

Tree support is only needed beneath the steering column. All other parts print without supports in the supplied orientations. Remove the three bed clamps from the bottom of the dash and the steering-column support before installation.

Filaments used in the product photos

To recreate the photographed finishes, we used these PETG filaments:

• Matte Black: Inslogic PETG Pro — Black.
• Light Tan: OVERTURE Rapid PETG — Oak.
• Dark Grey: Polymaker PETG — Dark Grey.

The tub, dashboard and steering wheel use the featured interior color; the cage and tub mounts are black in the photographed sets. You can print your own set in your preferred colors. Filament is purchased separately.

Required hardware

Reuse the factory screws for the rear retaining mount. Hardware is not included with this digital purchase.