Body Mounting Kit for VS4-10 Series (Fits RC4WD® 1987 Toyota XtraCab Hard Body) (STL File)
$11.99
Skip to product information
Body Mounting Kit for VS4-10 Series (Fits RC4WD® 1987 Toyota XtraCab Hard Body) (STL File)
$11.99
Please agree that you will not share this digital file and will only use it for personal use.
You will receive an email with the download links for the files right after purchase, so make sure to double check your email address at checkout.
3D Print File Information
3D Print File Information
Purchasing STL Files:
- The file(s) will be available to you right after purchase.
- By purchasing, you agree to use any provided STL file(s) only for yourself and for personal, non-commercial use.
Recommended Filament: We suggest using ABS or ASA for best results. PLA can be used, but may fail in hot climates due to its low melting point.
Please Note: The provided STL file(s) do not contain any printer settings. It is up to you to slice them for your specific printer. We do not offer any slicing or printing support.
Hardware: See below in the product description for a list of any additional hardware needed to complete this item. Hardware is not included with your file purchase.
This mount kit allows you to easily mount the RC4WD® 1987 Toyota XtraCab Hard Body on your Vanquish® VS4-10 chassis. Includes low profile shock towers, and a rear bed support that goes on top of the factory receiver box lid.
Fitment Notes
- The piece that sticks down under the bed in the center needs to be trimmed off for best fit. See photos for more information.
- Interior modifications will need to be done to clear the transmission if you are using the interior.
Fitment
- Vanquish® VS4-10 series chassis
Required Hardware
- M3x8 Flat Head Screws (Qty 4)
- M3x8 Button Head Screws (Qty 4)
- M3x10 Button Head Screws (Qty 4)
- M3x12 Button Head Screws (Qty 2)
- M3x14 Flat Head Screws (Qty 4)
- M3 Washers (Qty 2)
- Instructions <- Click to View
Printing Notes
- We suggest printing the rear bed support in TPU.