Skip to product information
Universal Mini Sliders (Fits Vanquish® VRD Carbon / Mullet / Stance) (STL)
$3.99
You must agree to the terms before adding to cart
3D Print File Information
3D Print File Information
Purchasing STL Files:
- The file(s) will be available to you right after purchase.
- By purchasing, you agree to use any provided STL file(s) only for yourself and for personal, non-commercial use.
Recommended Filament: We suggest using ABS or ASA for best results. PLA can be used, but may fail in hot climates due to its low melting point.
Please Note: The provided STL file(s) do not contain any printer settings. It is up to you to slice them for your specific printer. We do not offer any slicing or printing support.
Hardware: See below in the product description for a list of any additional hardware needed to complete this item. Hardware is not included with your file purchase.
Looking for a narrower set of sliders for your VRD? Our high clearance sliders provides a better look and a better fit for those narrower comp bodies.
Universal Narrow Flat Top Sliders:
- Works with most aftermarket bodies (except Jconcepts Anvil)
- Flat top design for easy electronics and battery mounting
- Includes smaller battery strap for those comp packs.
Tested to work with the following bodies:
- Pro-Line® Comp Wagon
- Pro-Line® Cliff Hanger (Full length & cab only)
- Pro-Line® Coyote & Coyote Grande
- Vanquish® Stance
Note: These sliders will sit inside of the body and may not go all the way to the body. See measurements to see how they would work for your setup.
Product Fitment:
- Vanquish® VRD Carbon
- Vanquish® VRD Stance
- Vanquish® Mullet
*Note: These are designed to work with the factory chassis rails.
Required To Complete:
- M3x12 Button Head Screws (Qty 4)
- M3x20 Button Head Screws (Qty 4)
- M3 Lock Nut (Qty 2)
- Battery Strap (Qty 1)
Note: Depending on where the links are mounted will determine which length screws are needed to mount. M3 nuts can be used with extra screws if needed.