Skip to product information
Shock Station (For 1/10 and 1/8 Shocks) (STL)
$8.99
You must agree to the terms before adding to cart
3D Print File Information
3D Print File Information
Purchasing STL Files:
- The file(s) will be available to you right after purchase.
- By purchasing, you agree to use any provided STL file(s) only for yourself and for personal, non-commercial use.
Recommended Filament: We suggest using ABS or ASA for best results. PLA can be used, but may fail in hot climates due to its low melting point.
Please Note: The provided STL file(s) do not contain any printer settings. It is up to you to slice them for your specific printer. We do not offer any slicing or printing support.
Hardware: See below in the product description for a list of any additional hardware needed to complete this item. Hardware is not included with your file purchase.
Our shock station is a great way to keep your shocks organized while building and servicing them. Works for 1/10 and 1/8 sized shocks.
Required To Complete:
- M3x12 Flat Head Screws (Qty 3)
- M3x10 Button Head Screws (Qty 3)
- 2oz Disposable Cups (Qty 3)
These are the disposable cups we suggest for replacements. Pretty much all 2oz cups that we have tried fit as well.