← Back To Previous Page

Skip to product information
Inner Fenders for Jconcepts® Anvil Body (Fits Axial® SCX10 Pro) (STL)
  • Inner Fenders for Jconcepts® Anvil Body (Fits Axial® SCX10 Pro) (STL)
  • Inner Fenders for Jconcepts® Anvil Body (Fits Axial® SCX10 Pro) (STL)
  • Inner Fenders for Jconcepts® Anvil Body (Fits Axial® SCX10 Pro) (STL)
  • Inner Fenders for Jconcepts® Anvil Body (Fits Axial® SCX10 Pro) (STL)
  • Inner Fenders for Jconcepts® Anvil Body (Fits Axial® SCX10 Pro) (STL)
  • Inner Fenders for Jconcepts® Anvil Body (Fits Axial® SCX10 Pro) (STL)
  • Inner Fenders for Jconcepts® Anvil Body (Fits Axial® SCX10 Pro) (STL)
Inner Fenders for Jconcepts® Anvil Body (Fits Axial® SCX10 Pro) (STL)

Inner Fenders for Jconcepts® Anvil Body (Fits Axial® SCX10 Pro) (STL)

$4.99
I need an icon to show information for an STL 3d print file download 3D Print File Information

Purchasing STL Files: 

  • The file(s) will be available to you right after purchase.
  • By purchasing, you agree to use any provided STL file(s) only for yourself and for personal, non-commercial use.

Recommended Filament: We suggest using ABS or ASA for best results. PLA can be used, but may fail in hot climates due to its low melting point.

Please Note: The provided STL file(s) do not contain any printer settings. It is up to you to slice them for your specific printer. We do not offer any slicing or printing support.

Hardware: See below in the product description for a list of any additional hardware needed to complete this item. Hardware is not included with your file purchase.

These inner fenders are a must have when running a Jconcepts® Anvil body on your Axial® SCX10 Pro to keep out extra dirt and debris, along with adding to the scale appearance. Includes a lightweight scale radiator to finish off the look.

Features:

  • Works with both AMS and CMS setups
  • Designed to work with our #3123 Anvil Sliders
  • Designed to work with our #2104 Trail Tray

Product Fitment:

  • Axial® SCX10 Pro (Both CMS and AMS configurations)

Note: These are designed to work with the factory chassis rails.

      Required To Complete:

      • M2x6 Button Head Screws (4 Pieces)
      • M3x12 Button Head Screws (4 Pieces)
      • M3x22 Button Head Screws (2 Pieces)

      Note: For the front body mounting, use the SUV body mount that is included with the SCX10 Pro, body mount spacers, and M3x12mm screws to mount it to the inner fenders.