Skip to product information
Inner Fender Front Battery Tray (Fits Vanquish® VRD, Mullet & Stance) (STL)
$2.99
You must agree to the terms before adding to cart
3D Print File Information
3D Print File Information
Purchasing STL Files:
- The file(s) will be available to you right after purchase.
- By purchasing, you agree to use any provided STL file(s) only for yourself and for personal, non-commercial use.
Recommended Filament: We suggest using ABS or ASA for best results. PLA can be used, but may fail in hot climates due to its low melting point.
Please Note: The provided STL file(s) do not contain any printer settings. It is up to you to slice them for your specific printer. We do not offer any slicing or printing support.
Hardware: See below in the product description for a list of any additional hardware needed to complete this item. Hardware is not included with your file purchase.
This battery tray allows you to mount the battery as far forward as possible in your VRD when running inner fenders. Includes a shorter strap for those small batteries.
Note: Forward battery position does not allow the use of the radiator. Back position requires removal of the cross member at the shock towers. Does not require stubby kit.
Fitment:
- Vanquish® VRD Carbon
- Vanquish® VRD Stance
- Vanquish® VRD Kit
- Vanquish® VRD Mullet
Required To Complete:
- M3x8 Button Head Screws (Qty 2)
- M3x8 Flat Head Screws (Qty 2)
- Battery Strap (Qty 1)