Skip to product information
Beadlock Buddy™ Wheel Assembly Tool (STL)
$3.99
You must agree to the terms before adding to cart
3D Print File Information
3D Print File Information
Purchasing STL Files:
- The file(s) will be available to you right after purchase.
- By purchasing, you agree to use any provided STL file(s) only for yourself and for personal, non-commercial use.
Recommended Filament: We suggest using ABS or ASA for best results. PLA can be used, but may fail in hot climates due to its low melting point.
Please Note: The provided STL file(s) do not contain any printer settings. It is up to you to slice them for your specific printer. We do not offer any slicing or printing support.
Hardware: See below in the product description for a list of any additional hardware needed to complete this item. Hardware is not included with your file purchase.
The Beadlock Buddy™ was designed to work on RC beadlock wheels ranging from 1.55 to 2.2 inches in size and works with both rim bolt and center bolt style wheels. This tool allows for easier assembly by squeezing the whole wheel and tire assembly together in one step first so you can easily install the retaining screws.
Required To Complete:
- M4x50mm Stainless Steel Bolt (1 Piece)
- M4 Stainless Flat Washer (1 Piece)
- M4 Wing Nut (1 Piece)
Product Notes: If the tool starts to bend then something is binding up with the wheel assembly. Double check that the tire bead isn't being pinched and that the wheel is going straight together. Excessive force will just break the tool.