Micro Servo Winch Mount and Grille for Axial Capra
Micro Servo Winch Mount and Grille for Axial Capra
Micro Servo Winch Mount and Grille for Axial Capra
Micro Servo Winch Mount and Grille for Axial Capra
Micro Servo Winch Mount and Grille for Axial Capra
Micro Servo Winch Mount and Grille for Axial Capra
Micro Servo Winch Mount and Grille for Axial Capra
Micro Servo Winch Mount and Grille for Axial Capra
Micro Servo Winch Mount and Grille for Axial Capra
Micro Servo Winch Mount and Grille for Axial Capra
Micro Servo Winch Mount and Grille for Axial Capra
Micro Servo Winch Mount and Grille for Axial Capra
Micro Servo Winch Mount and Grille for Axial Capra
Micro Servo Winch Mount and Grille for Axial Capra
Micro Servo Winch Mount and Grille for Axial Capra
Micro Servo Winch Mount and Grille for Axial Capra
Micro Servo Winch Mount and Grille for Axial Capra
Micro Servo Winch Mount and Grille for Axial Capra
Micro Servo Winch Mount and Grille for Axial Capra
Micro Servo Winch Mount and Grille for Axial Capra

Micro Servo Winch Mount and Grille for Axial Capra


Regular price $18 $0 Unit price per

Now Accepting  Pre-Order’s for both styles. 


Looking to mount the Reef's 99Micro Servo Winch to your Axial Capra? Then look no further. I designed this mount to tuck right in front of the battery while still allowing full use of the battery compartment. Also, the grille has a built in fairlead. for the winch line. It's designed to work with the factory axial headlight lenses and LED's as well. 

WITH "7 SLOT" STYLE GRILLE

 

WITH "YOTA"  STYLE GRILLE

 

 

Package Includes:

  • Micro Servo Mount (1 Piece)
  • Front Grille With Built-in Fairlead (1 Piece)
  • Roof Mount Rope Guide and Pulley (1 Piece)
  • M2.5x6mm Button Head Screws (4 Pieces)
  • M3x8mm Button Head Screws (4 Pieces)
  • M3x10mm Button Head Screw (1 Piece)
  • M3x25mm Button Head Screw (1 Piece)

Don't forget to order some Competition Winch Line (Available Here) as well. It's only 0.8mm in diameter yet stronger than the included line so you can fit more on the drum. It's easier to install as well. 

Axial Replacement Headlight Lenses: Part#AXI230010 (From your favorite dealer) 

 

To install, you will need to lightly shave the cross brace as shown for pulley clearance. We used a fiberglass cutoff wheel on a Dremel here.

 

 

This kit also includes a bonus roof line guide with roller that works great for side pulls and rollover assistance.

     

    Product Notes: You will need to glue the headlight lenses into the grille. You can use a drop of CA glue (doesn't need much, too much may cause the lenses to turn cloudy) or some Shoe Goo or similar to hold them in place. Finish work may be required to headlight openings with a hobby knife for lenses to fit well. Reef's 99 Micro Servo Winch shown in the photos sold separately from your favorite Reef's RC supplier. 


    PRODUCT INFORMATION:

    SHIPPING WEIGHT: 1.0 oz


    Warning: Our products are not toys and are not for children under 14 years old without adult supervision.
    Recovery Gear Warning: Please use caution when performing recoveries as injury could result while under tension.


    Share this Product