UNIVERSAL SELF RECOVERY SYSTEM INSTALL GUIDE - WRAITH 1.9

WRAITH 1.9 INSTALL GUIDE PICTURES:
This is just an idea of how we installed this kit into our Axial Wraith 1.9. We did have to trim 1.5 inches off of the line due to the short chassis. We did this by cutting the knot end at the multi hook and making it shorter. You will need to use a lighter to melt the end of the kinetic line and then re-tie the figure 8 knot to secure the multi anchor back onto the end of the line. You MUST use a figure 8 knot in this location.